Tinymight V2 Vaporizer

(2 customer reviews)

The original price was: €349.The current price is: €339.

TinyMight 2: Finnish Portable Pure Convection Wood Vaporizer, On-Demand in Seconds or Session, Removable 18650 Battery and Glass Tube.

140–250°CTemperature range
140°C · Delicate aromas250°C · Intense steam
Technical specifications
Temperature
140°C – 250°C
Heating
Convection
Recharge
USB-C
Weight
186 g
Warranty
3 years from delivery with registration within 1 year
Heating (detail)
Pure convection, 75W heater
Mode
On-demand and session
Temperature
Manual: 140°C (pos. 1) - 250°C (pos. 10) in on-demand, max 230°C in session (0 = block); product page: approx. 120-240°C
Heating in
2-5 seconds (on-demand)
Room
In the base of the glass tube, adjustable volume with the Cooling Unit
Drums
1 removable 18650 cell, min. 20 A continuous (including Molicel P26A, P28A or P30B)
Recharge (detail)
USB-C (at least 2A power adapter), about 1.5 hours to 90%; or external charger
Dimensions
88 × 61 × 37 mm (without tube); 110 × 61 × 37 mm with 55 mm tube
Weight (detail)
186 g (without tube); 207g with 55mm tube
Materials
American walnut wood, aluminum, stainless steel, quartz glass
Warranty (detail)
3 years from delivery with registration within 1 year (glass and wear parts excluded)
Manufacturer / Country
JTJS Products Oy (Tinymight), Helsinki, Finland

Technology

Designed for excellence

💨

Heating

Pure convection, 75W heater

🌡

Temperature

Manual: 140°C (pos. 1) - 250°C (pos. 10) in on-demand, max 230°C in session (0 = block); product page: approx. 120-240°C

⏱

Heating in

2-5 seconds (on-demand)

🔋

Drums

1 removable 18650 cell, min. 20 A continuous (including Molicel P26A, P28A or P30B)

⚡

Recharge

USB-C (at least 2A power adapter), about 1.5 hours to 90%; or external charger

🫙

Room

In the base of the glass tube, adjustable volume with the Cooling Unit

Packaging

What's included

Vaporizer TinyMight (wooden body) with multitool for loading and mixing
– 55mm glass tube
– Cooling unit
– Molicel P26A, P28A or P30B 18650 cell
– Short ball stem and bag of glass balls
– Spare parts kit: O-rings and screens
– USB-C to USB-C cable
– Soft case

The TinyMight 2 is a portable pure convection vaporizer handcrafted in Finland, featuring a wooden body and a glass tube that serves as both the chamber and mouthpiece. The manufacturer claims it heats up in 2-5 seconds and can operate both on-demand, heating only while you press the button, and in session mode at a constant temperature. It's designed for those seeking very clean, dense vapor with small loads and requires a replaceable 18650 battery, accepting some initial practice.

Who is TinyMight 2 for?

  • For those who use small amounts several times a day: in on-demand you heat only when you inhale, without consuming material between one inhale and the next.
  • For those who want pure convection: hot air passes through the material without the herbs touching hot surfaces, with a very clean flavour at low temperatures.
  • For those who prefer simple long-term maintenance: the 18650 battery can be removed and replaced by yourself, without sending the device in for service.
  • For those who also use a water pipe: the manufacturer sells 14 and 18 mm connection adapters separately.
  • For those who appreciate a handcrafted object, without a display or app, with analog controls.

Less suitable if you are looking for a “turn on and use” device with a display and temperature to match, or if you want to charge a lot of material for long sessions with friends: in that case a hybrid like the Venty or Mighty+ is more immediate.

The TinyMight V2 is designed for those who want a quality vaporizer, for those looking for the best vaping experience.

The replaceable battery and the availability of spare parts make it a long-lasting product, although there have been few cases of defects in our experience.

Design and materials

The body is made of American walnut, with aluminum and stainless steel parts. According to the manufacturer, it measures 88 × 61 × 37 mm and weighs 186 g without a mouthpiece (110 mm and 207 g with the 55 mm tube): it fits in a jacket pocket, but is bulkier and heavier than a portable pocket-sized conduction system. The wood remains pleasant to the touch even during use, but should be treated like a wooden object: avoid impacts, humidity, and solvents on the surface.

The vapor path is the key to the design. The herbs sit at the bottom of a glass tube (the "stem"), resting on a screen. The tube inserts into the heater, and the top portion becomes the mouthpiece. The vapor then passes almost entirely through the glass before reaching your mouth. The Cooling Unit runs through the tube: by moving it with the multitool, you can adjust the chamber volume, from microdoses to full loads.

The temperature is set with an analog dial on the bottom, numbered from 0 to 10 with half-positions in between; the single button is used to turn it on, select the mode, and heat. An LED and vibration indicate the status and battery level. There are no screens, Bluetooth, or apps.

Heating and temperatures

The TinyMight 2 is a pure convection device: a 75W heater (according to the manufacturer) heats the air, which then passes through the material. This is the reason for the almost instantaneous on-demand heating: the device doesn't have to heat a metal chamber, just the airflow. The manufacturer specifies 2-5 seconds.

According to the official manual, the dial ranges from approximately 140°C (position 1) to 250°C (position 10) in on-demand mode; in session mode, the maximum is 230°C. The product page and official FAQs instead give an indicative range of approximately 120-240°C: the manual's table is valid for the individual positions. Position 0 is the lock: with the dial on 0, the device does not turn on, useful for keeping in your bag.

The two modes: on-demand and session

  • On-demand: Activates with three quick presses of the button. The heater only works while you hold it down and inhale. This is the most battery-efficient mode and the one the TinyMight is best known for: ideal for one or a few inhalations at a time.
  • Session: Three quick presses, holding down the last one until the device stops vibrating. The heater maintains the temperature without holding the button, convenient for continuous sessions or when sharing; holding the button temporarily increases the temperature. Consumes more battery.

Recommended strategy

It's best to start low (position 4-5) and gradually work your way up. When using on-demand, the way you draw also matters: the manual recommends taking a slightly longer inhale than usual, as the material requires airflow to reach the desired temperature. With the short glass tube, the vapor arrives hot: if it bothers you, lower the setting by half a number or draw more slowly.

How does it extract the material?

Being a convection oven, the TinyMight produces gradual and generally even extractions: the food changes color uniformly instead of toasting only when in contact with the walls. With full loads, the area closest to the air intake tends to cook first: if you see light spots halfway through use, a stir with the included tool will fix the problem.

Camera and loading

The chamber is the lower part of the glass tube. It is loaded by holding the device upside down or by removing the tube and placing the material on the screen. The manufacturer does not specify a capacity in grams: the volume is adjusted by moving the Cooling Unit in the tube, from microdoses to full loads. The TinyMight performs best with modest loads, repeated several times.

  • Grind: medium or medium-coarse. Too fine risks slipping through the screen and increasing resistance.
  • Packing: Pack lightly. A tightly packed load blocks the airflow, which is everything in a convection oven.
  • Replacement Tubes: If you purchase extra glass tubes, you can pre-load them and swap them out on the go, conveniently on the go.

The official guide recommends the highest setting (10, on-demand only) as the most suitable, even for occasional use with concentrates. This is a secondary use: the TinyMight remains a dry herb vaporizer.

Battery and charging

The TinyMight 2 uses a removable 18650 cell (not an 18350): the package includes a Molicel P26A, P28A, or P30B, the cells recommended by the manufacturer. This is one of its main advantages: when the cell loses capacity, you can replace it yourself, and with a second charged cell, you double your battery life on the go.

Be careful with the replacement cell: the manual requires a quality, high-current 18650 battery with at least 20 A of continuous discharge. Generic or flashlight cells are not suitable and can be dangerous. Always insert the cell according to the indicated polarity.

Charging is via USB-C with a power supply of at least 2A; the red LED stays on during charging and turns off when fully charged. According to the official FAQ, it takes about an hour and a half from empty to 90%; the bottom aluminum panel gets warm during charging, which is normal. You can also charge the cell in an external 18650 charger. The manufacturer doesn't specify battery life: it depends largely on the mode, with on-demand mode being the most energy-efficient in session mode. When turned on, the color of the LED and the number of vibrations indicate the remaining charge (from green/4 vibrations to red/1 vibration).

How to use: step by step

  1. Make sure the 18650 cell is inserted and charged, then rotate the dial from 0 (lock) to the desired position: 4-5 to start.
  2. Grind the material medium-fine and load it into the lower part of the glass tube, onto the screen, without pressing.
  3. Insert the tube all the way into the device.
  4. Choose your mode: three quick presses for on-demand; three presses and hold the last one until the device stops vibrating for the session.
  5. In on-demand mode, hold down the button and, after the vibration, inhale slowly and for a little longer than usual; in a session, inhale calmly; the warm-up is continuous.
  6. If the steam drops, go up a half number or stir the material; when it is uniformly brown, the load is exhausted.
  7. Turn it off (press the button three times), let it cool, and empty the tube. Return the dial to 0 when you put it in your pocket.

Cleaning and maintenance

The glass needs to be cleaned frequently: in convection vapes, condensation builds up in the tube and affects flavor and draw. The manual recommends washing the tube with water and detergent or soaking it in isopropyl alcohol, always after removing the O-rings, which should not be soaked in solvent. Every few sessions, use a cotton swab soaked in isopropyl alcohol to clean the chamber and any accessible internal parts; the internal parts can be removed using the tube holder ring, following the manual. Replace the screens and O-rings when they darken or lose their seal: the included replacement kit is for this purpose. Never get the wooden body wet.

TinyMight 2 Comparison

TinyMight 2 vs. Venty

The Venty by Storz & Bickel is a hybrid with a display, adjustable temperature between 40 and 210°C, adjustable airflow, and heat-up time of about 20 seconds. It's easier to use, with consistent results right out of the box, and has a built-in battery. The TinyMight 2 is more specialized: pure convection, near-instant on-demand, a replaceable 18650 battery, and analog controls. Choose the Venty if you want precision, a display, and sessions without a learning curve; choose the TinyMight if you use small doses throughout the day and are looking for the purest flavor.

TinyMight 2 vs Mighty+

The Mighty+ is a robust and very simple hybrid, designed for full sessions: charge it, wait for it to warm up, and use it for several minutes. It's larger and heavier, has built-in batteries, and offers very stable temperature management. The TinyMight 2 is more compact and better suited for on-demand use, but requires more attention to draw and cell selection. For those looking for a "hassle-free" device, the Mighty+ is better; for those looking for on-demand vaping and DIY maintenance, the TinyMight is the more consistent choice.

Basic package list according to the official website. Contents may vary between batches and revisions: the list on the packaging is authoritative.

Warranty and assistance

The manufacturer, JTJS Products Oy of Helsinki, offers a three-year warranty from the date of delivery. The warranty is valid only if you register the product on the official website within one year of delivery; registration is required only once, by the original owner. Wear parts are excluded: glass tubes, screens, O-rings, battery, charging cable, dosing capsules, and included accessories. Claims require the original invoice and, usually, a video of the problem. The consumer's statutory rights remain valid.

Frequently Asked Questions

What battery does the TinyMight 2 use? Is it an 18350?
No, it uses a removable 18650 cell. You need a quality, high-current cell (at least 20A continuous): the manufacturer recommends Molicel P26A, P28A, or P30B.

On-demand or session?
On-demand is the TinyMight: it saves battery and equipment and allows you to use only what you need. Session mode is useful if you want to shoot multiple times in a row or share.

How much material can be loaded?
Not much: the manufacturer doesn't specify a weight, but the chamber volume can be adjusted by moving the Cooling Unit in the tube. The device is designed for small, frequent loads, not for long sessions.

Is the vapor hot?
With the short glass tube, it can be, especially at higher settings. Lower the ring or draw more slowly; the manufacturer also sells longer 80 mm mouthpieces separately.

Can I change the battery myself?
Yes, that's one of the advantages: when the cell gets old, you can replace it with a suitable 18650, without assistance.

What's the difference between the black version and the black one?
The black version is a more recent revision, with updated features. Before purchasing, compare the package contents indicated in the two descriptions.

2 reviews for Vaporizer Tinymight V2

5,0
Based on 2 reviews
5
100
100%
4
0%
3
0%
2
0%
1
0%

Customer photos and videos

Image #1 by Ferruccio C.
Image #1 by Ferruccio C.

Ferruccio C.

Everything perfect

Image #1 by Ferruccio C.
With media
Review 1-2 of 2
  1. purchased last January, everything ok, fantastic product

  2. Verified reviewVerified review - view originalExternal link

    Everything perfect

    Image #1 by Ferruccio C.
Add a review
We are not currently accepting new reviews

Verify your age

You must be at least 18 years old to access this site.

IlVaporizzatore
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognizing you when you return to our website and helping our team understand which sections of the website you find most interesting and useful.