The Volcano Hybrid is Storz & Bickel's flagship desktop vaporizer: a hot air generator that can be used with either the Easy Valve balloon or the whip, featuring hybrid convection + conduction heating and digital, degree-by-degree control. It's designed for those who want to use dry herbs at home, alone or with friends, with a device designed and assembled in Germany. Its strong point is its speed: according to the manufacturer, it reaches 180°C in about 40 seconds.
Who is the Volcano Hybrid for?
- Those who use the vaporizer mainly at home and want a stable, mains-powered device without worrying about battery life.
- Who shares the sessions: the balloon is passed from hand to hand and can be filled multiple times with the same chamber.
- Those who want to choose between two ways of inhaling: balloon for a cool and resistance-free vapor, tube for continuous sessions at the table.
- For those who like to regulate everything with precision: temperature adjustable from 40 to 230 °C in 1 degree increments, touch display and web app via Bluetooth.
- Those coming from the Volcano Classic and looking for much shorter heat-up times and digital control.
Less suitable if you need a device to take out of the house, if you use very small quantities on your own (the chamber is large) or if you are looking for the simplest and cheapest solution to use only the balloon: in that case consider the Volcano Classic.
Take the Volcano Classic and improve it: this is theHybrid, the best there is in desktop vaporizers. All customers rave about it.
Design and materials
The Volcano has the conical shape that has made it recognizable since 2000: a wide base, a low center of gravity, and a footprint of approximately 20 x 20 cm by 18 cm high, weighing approximately 1.8 kg. On the front is a display with touch buttons that shows the actual and set temperatures; at the top is the heat exchanger onto which the filling chamber is attached.
Compared to the Classic, the Hybrid has a detachable power cord (IEC C7/C8 connector), making it easier to transport and replace. It is hand-assembled in Germany, where Storz & Bickel has its factory in Tuttlingen.
On our website, you'll find the Silver, Black, and Evergreen. The latter, a special edition from Storz & Bickel, has an iridescent green finish with silver-gray accents. The differences are purely aesthetic.
Heating and temperatures
The Hybrid uses a double-helix heat exchanger with hybrid heating: the heated air passes through the plant material (convection) and part of the heat reaches the chamber by contact (conduction). The manufacturer claims heating up to 180°C in about 40 seconds, compared to about 5 minutes for the Volcano Classic.
The temperature is adjusted using the plus and minus buttons: a short press changes the value by 1 degree, while holding down the button scrolls continuously. Pressing both buttons together switches between °C and °F. The adjustable range is 40–230 °C. The value displayed is measured at the heat exchanger: the actual temperature of the steam also depends on the amount of steam loaded and how strong and long the suction is.
With the S&B web app (opened from your browser, no need to download an app from the store), you can set the temperature from your smartphone or computer, adjust the display brightness, and install firmware updates. According to the Storz & Bickel data sheet, the web app also allows you to control the automatic shutdown, which is factory-set after 30 minutes. It works with browsers that support Bluetooth Low Energy: Chrome on Android, macOS, and Windows, and Edge on Windows; on iPhone and iPad, you'll need a browser like Bluefy (also required for firmware updates) or WebBLE.
Recommended strategy: Start between 175 and 185°C to bring out the aromas and terpenes, then increase the temperature by 5-10°C at a time between each balloon or during your tube session. Temperatures above 210°C extract more but the flavor becomes more roasted. Wait for the actual and set temperatures to match before installing the balloon or tube.
Camera and loading
The removable filling chamber is made of stainless steel and, according to Storz & Bickel, has a volume of 6.5 cm³, equivalent to approximately 600 mg of material. The manual recommends filling it to the bottom edge of the hopper. Use a medium grind (the grinder is included): too fine a grind clogs the screens, too coarse a grind reduces extraction.
For small doses, you can use Storz & Bickel dosing capsules, which require the specific chamber or capsule adapter of the Volcano Hybrid (accessories sold separately).
Balloon or tube: the two inhalation systems
Easy Valve Balloon
The internal pump pushes hot air through the chamber and fills a balloon equipped with a valve: when you detach it, the valve closes automatically, and when you insert the mouthpiece, it reopens. The balloon's large surface area cools the vapor, which is inhaled with virtually no resistance. The manual recommends filling the balloon only with the amount you plan to use within the next 10 minutes, because over time, the vapor condenses on the walls.
The Easy Valve set is ready to use: the ball and valve are already assembled and can be replaced together when the ball is worn out. The Easy Valve XL version with a larger ball is also available. The Solid Valve system, with a reusable valve and a roll of film that can be cut to size, is officially recommended for Volcano Classic and Digit, not the Hybrid.
Tube (whip)
The tubing kit includes a 1-meter hose, an elbow (Tube Flexer), and a mouthpiece. It connects directly to the preheated chamber and is inhaled slowly for a few seconds, with the pump turned off: your breath draws hot air through the material. Storz & Bickel specifies a flow rate of up to 30 liters per minute, so suction is free. The manufacturer recommends using a hose at least 1 meter long to give the steam time to cool.
Installation and use at home
Place the Volcano on a stable, clear surface, away from edges and water sources, and leave space around the heat exchanger, which gets very hot during use. It operates at 220–240 V (European version), with a heating power of 270 W and a 10 W pump. The pump is audible: in a quiet environment, you will hear it as you fill the balloon.
The manual recommends not leaving the filling chamber on the generator with the heating on, except when filling the balloon or using the tube.
How to use: step by step
- Grind the material to a medium grain and fill the chamber without exceeding the bottom edge of the hopper; close the lid.
- Turn on the heating with the HEAT button and set the temperature (to start 175-185 °C).
- Wait until the actual temperature matches the one set on the display.
- With the balloon: attach the chamber, stretch the Easy Valve balloon and place it vertically on the chamber, then start the pump with the AIR.
- Turn off the pump when the balloon has the desired volume, detach the balloon from the chamber, insert the mouthpiece and inhale.
- With the tube: With the pump off, attach the chamber and tube with the elbow above the exchanger and inhale slowly for a few seconds.
- Between each balloon, you can increase the temperature by a few degrees. At the end of the session, turn off the heating, remove the chamber, and let it cool before emptying it.
Cleaning and maintenance
Parts that come into contact with steam (filling chamber, lid, hose bend, and mouthpiece) should be cleaned regularly. Storz & Bickel recommends isopropyl alcohol or hot water and dish soap. Do not leave plastic parts immersed in alcohol for more than half an hour.
Balloons and tubing are consumables: for hygiene reasons, Storz & Bickel recommends replacing the balloon, Easy Valve mouthpiece, and tubing every two weeks, and not sharing the tubing with other people. Empty the chamber after each session: debris that accumulates on the screens reduces airflow. The inlet air filter is replaced with the included replacement set. For parts subject to wear, a Wear & Tear Set is available.
Volcano Hybrid comparison
Volcano Hybrid vs Volcano Classic
Same Easy Valve balloon and same chamber capacity (about 600 mg), but different philosophies. The Volcano Classic has convection-only heating, analog dial control (130–230°C), about 5 minutes of heating time, and balloon-only heating. The Hybrid adds much faster hybrid heating (about 40 seconds at 180°C), a digital display, web app, detachable cord, and a direct inhalation tube. If you're balloon-only and looking for simplicity, the Classic remains a solid choice; if you want flexibility and speed, the Hybrid. Read more: Volcano Classic vs. Volcano Hybrid: Which One to Choose in 2026.
Volcano Hybrid vs Arizer XQ2
TheArizer XQ2 offers a balloon and tube, with a glass vapor path, three-speed fan, remote control, and a range of up to 500°F (260°C). It costs less and also features an aromatherapy function. The Volcano Hybrid fills balloons faster, has the Easy Valve system with a valve and faster heat-up, as well as a widespread support and parts network. The XQ2 is the choice for those who want to try desktop vaporization on a more limited budget.
Volcano Hybrid vs Mighty+
The Mighty+ uses the same hybrid heating concept, but is battery-powered and has a smaller chamber. It's the perfect choice if you also need a portable heater. A common combination is a Volcano for home and a portable one for on-the-go.
Warranty and assistance
Storz & Bickel offers a two-year warranty from the date of purchase for products purchased from authorized dealers. By registering your Volcano Hybrid on the manufacturer's website within four weeks of purchase , with your serial number and invoice, you will receive an additional year of limited warranty, for a total of three years. Please retain your invoice: it is required for both registration and in the event of a service request.
The manufacturer's warranty does not cover accessories and parts subject to wear, such as balloons, tubes, nets, and the filling chamber. Accessories purchased in the European Union are covered by the two-year legal warranty against material and manufacturing defects. Damage resulting from improper use, improper maintenance, or unauthorized repairs is also excluded.
For completeness: Storz & Bickel also produces the Volcano Medic 2, a version certified as a medical device (DIN EN 60601) and distributed through a dedicated channel. The Volcano Hybrid , on the other hand, is a device for home use, compliant with DIN EN 60335.
Frequently Asked Questions
Is it better to use the balloon or the tube?
It depends on the use. The balloon is more convenient for company and produces cooler vapor, without any effort. The tube is easier to use when you're alone at a table. With the Hybrid , you get both in the package.
Can the Solid Valve system be used on the Volcano Hybrid?
Storz & Bickel lists the Solid Valve Set as compatible with Volcano Classic and Digit. For the Hybrid , the official system is the Easy Valve (also available in the XL version), in addition to the hose.
Do you need to download an app?
No. The Hybrid is operated entirely using the buttons on the device. The S&B web app is optional, opens from a browser, and requires Bluetooth; on iPhone, you'll need a browser like Bluefy.
How much material do I need to load?
The chamber holds approximately 600 mg. It's not necessary to fill it completely; for small quantities, you can use measuring capsules with the appropriate adapter, sold separately.
How do I get the third year of warranty?
Register your device on the Storz & Bickel website within four weeks of purchase, uploading your invoice and entering your serial number.












Very satisfied with the purchase and the service
Reliable company, super-fast shipping, and the price at the time of purchase was the best online! I can only recommend everyone to buy with confidence, and I thank the seller for their courtesy and pre-sales assistance.