The Volcano Classic is the desktop vaporizer with which Storz & Bickel popularized the balloon system: the first Volcano hit the market in 2000, and the model is still in production in Germany today. It operates on convection only, is controlled with an analog dial, and fills a balloon with a valve from which you can inhale at your leisure, even in company. It's the perfect choice for those looking for a simple, robust device without unnecessary electronics.
Who is the Volcano Classic for?
- Those who use dried herbs mainly at home and prefer a fixed, mains-powered appliance.
- For those who love the ball: fresh vapor, no effort to suck, easy to pass to others.
- For those who want few controls: two switches and a knob, no display, apps or menus.
- Those looking for a Volcano while spending less than the Volcano Hybrid, with the same chamber and the same Easy Valve balloons.
- For those who prefer a reusable system: in addition to the Easy Valve, the Classic is compatible with the Solid Valve.
Less suitable if you also want to inhale with the tube, if you need to set the temperature to the degree or if you don't want to wait a few minutes for it to warm up: in these cases, look at the Volcano Hybrid.
A classicin the world of desktop vaporizers. A firm favorite for years, it's loved by many for its simplicity and build quality.
Design and materials
The Classic has the classicconical shape as the Volcano: approximately 20 x 20 cm at the base, 18 cm high, and weighing approximately 1.6 kg, making it very stable on the table. On the front, you'll find the temperature knob, a yellow heating light, and two rocker switches: HEAT for heating and AIR for the pump. Above, there's the heat exchanger onto which the filling chamber attaches.
Unlike the Hybrid, the power cord is fixed. The Classic is hand-assembled in Germany by Storz & Bickel, which has its factory in Tuttlingen; the manufacturer presents it as an icon of the Volcanoline, which was created in 2000.
On our website, the Classic is available in Silver, Black , and Evergreen. The Evergreen has an iridescent green finish with silver-gray details: the differences between the versions are purely aesthetic.
Heating and temperatures
The Volcano Classic heats air with a heat exchanger and pushes it through the plant material via a pump: it is convection heating only, without direct contact between the herbs and hot surfaces. The temperature is selected with a 9-level, which covers a range from approximately 130 to 230 °C.
The control is analog: there's no display showing the temperature, but a yellow light that stays on during heating and turns off when the exchanger has reached the selected level. According to Storz & Bickel, heating takes up to about 5 minutes (about 5 minutes to reach 180°C). The manufacturer specifies that the vaporization temperature may fluctuate by approximately ±5°C from the indicated values, due to the exchanger's heating and cooling cycle.
Recommended strategy: Storz & Bickel doesn't publish a table linking each knob setting to a specific temperature. Start at a medium setting, fill the first flask, and gradually increase the settings one by one. Lower temperatures enhance aromas and terpenes; higher temperatures extract more but with a more roasted flavor. Each time you change settings, wait for the yellow light to go off before refilling the flask.
Camera and loading
The filling chamber has a volume of 6.5 cm³ and, according to Storz & Bickel, holds approximately 600 mg of material. The herbs should be ground medium-grained: too finely will clog the screens, too coarsely will result in poor extraction. The grinder is included. The Classic is made of stainless steel and heat-resistant plastic and is closed with special clips and a locking ring.
For small doses, Storz & Bickel offers dosing capsules, which are used on the Classic with the adapter or the dedicated capsule chamber (accessories sold separately). The Classic chamber is not interchangeable with that of the Hybrid; however, the Easy Valve balloons are the same.
Easy Valve or Solid Valve
The Volcano Classic comes with the Easy Valve, but is also compatible with the Solid Valvevalve system Volcano. They work the same way (fill the balloon, unplug it, the valve holds the vapor, inhale through the mouthpiece), but handling and costs change over time.
Easy Valve (included)
The ball and valve are already assembled and ready to use. It's quick to assemble, requires no cutting or disassembly, and when the ball is worn out, the entire set can be replaced. It's the most practical solution for those who want simplicity; it's also available in an XL version with a larger ball.
Solid Valve (sold separately)
The valve is a robust and reusable component; the balloon is made from a roll of balloon film (3 m Balloon Tube) by cutting it to size. The official Solid Valve Set includes the valve with balloon, 3 m roll, mouthpiece, dedicated filling chamber, set of screens, and a brush. It requires a little more maintenance (the valve must be disassembled and cleaned), but in the long run, only the film needs to be replaced. Storz & Bickel specifies it as compatible with Volcano Classic and Volcano Digit.
In both cases, the material of the balloons, according to the manufacturer, is food-safe, heat-resistant and BPA-free.
Installation and use at home
Place the Volcano on a stable, clear surface, away from edges and liquids, with space around the heat exchanger, which becomes very hot during use. It operates at 220–240 V, 50–60 Hz (European version). According to the Storz & Bickel specifications, the heater consumes 100 W and the pump 11 W, with an air flow rate of approximately 12 liters per minute. The pump can be heard during filling.
Storz & Bickel recommends not leaving the chamber on the generator with the heating on, except while filling the balloon. The Classic has no display or app: remember to turn off the HEAT switch at the end of the session.
How to use: step by step
- Grind the herbs to a medium grain and fill the chamber to the maximum level; close with the lid and clips.
- Select the level with the knob and turn on the heating with the HEAT switch: the yellow light comes on.
- Wait for the light to go off (up to about 5 minutes): the exchanger is ready.
- Insert the chamber into the exchanger, turn on the pump (AIR) and let it blow for a few seconds.
- Stretch the Easy Valve balloon, place it vertically on the chamber and let it fill to the desired volume.
- Turn off the pump, detach the balloon and chamber, separate the balloon from the chamber, insert the mouthpiece and inhale.
- For the next balloon, you can raise the level a bit. At the end of the session, turn off the HEAT and let the chamber cool before emptying it.
The manual recommends filling the balloon only with the steam you plan to use within the next 10 minutes, because over time the steam condenses on the walls.
Cleaning and maintenance
Empty the chamber after each session and clean the chamber, screens, and mouthpiece regularly, and always before using the Classic for another person. Storz & Bickel recommends isopropyl alcohol with a cotton cartor cloth, or warm water and dish soap. Plastic parts should not be left soaking in alcohol for too long. The body of the device can only be cleaned with a soft cloth, or with water and mild soap.
Balloons are consumables: Storz & Bickel recommends replacing the Easy Valve balloon and mouthpiece every two weeks and not sharing them with multiple people. With the Solid Valve, a new balloon is cut from the roll. The inlet air filter should be checked every four weeks and, if dirty, replaced with the appropriate set; for seals and worn parts, the Wear & Tear Set for Volcano Classicis available.
Volcano Classic comparison
Volcano Classic vs Volcano Hybrid
Same 600 mg chamber and same Easy Valve balloons. The Volcano Hybrid adds hybrid convection + conduction heating (about 40 seconds at 180°C versus about 5 minutes for the Classic), a digital display with temperature adjustment from 40 to 230°C, a Bluetooth web app, a detachable cable, and a tube for direct inhalation. The Classic costs less, has only two switches and a knob, and is also compatible with the Solid Valve. We discuss this in detail in the article Volcano Classic vs. Volcano Hybrid: which one to choose in 2026.
Volcano Classic vs Arizer XQ2
TheArizer XQ2 generally costs less and offers more features: a digital display, temperature adjustment up to 500°F (260°C), a three-speed fan, a remote control, a hose in addition to the balloon, and a glass vapor path. The Classic focuses on simplicity and durability, with the Easy Valve or Solid Valve system and a larger chamber. If you want more control and versatility for the same budget, the XQ2; if you want the Volcano and minimal electronics, the Classic.
Warranty and assistance
The Volcano Classic purchased from an authorized dealer has a 2-year Storz & Bickel warranty. By registering it on the manufacturer's website within four weeks of purchase, with the serial number and invoice, you receive an additional year of limited warranty, for a total of 3 years.
The manufacturer's warranty does not cover accessories and consumables such as balloons, screens, tubing, and the filling chamber. Accessories purchased in the European Union are still covered by the two-year statutory warranty against material and manufacturing defects. Damage resulting from improper use, improper maintenance, or unauthorized repairs is excluded. Storz & Bickel also offers a paid repair service for devices out of warranty.
Storz & Bickel also produces the Volcano Medic 2, a version certified as a medical device and distributed through a dedicated channel; the Volcano Classic is a device for home use.
Frequently Asked Questions
the Volcano Classic analog or digital?
Analog: the temperature is selected with a 9-level knob and a light indicates when heating is complete. The version with a digital display was the Volcano Digit, now effectively replaced by the Volcano Hybrid.
Can you use the tube with the Classic?
The Classic is designed for the balloon and does not include a tube. If you want to alternate between balloon and tube, the recommended model is the Volcano Hybrid.
Which is better: Easy Valve or Solid Valve?
The Easy Valve is more practical: no cutting or disassembly required, just replace the set when needed. The Solid Valve requires more maintenance, but the valve lasts a long time and only the balloon film needs to be replaced.
What level should you start with?
Start at a medium level, then increase the temperature between each flask. Storz & Bickel doesn't specify the exact temperature for each level: the dial covers the range 130–230°C. Always wait until the yellow light goes off.
Are the Easy Valve balloons the same as the Hybrid?
Yes, the Easy Valve sets are compatible with both models. The filling chambers, however, are different.
How do I get the third year of warranty?
Register your Classic on the Storz & Bickel website within four weeks of purchase, uploading your invoice.














The best at the best price
Spectacular. A must-have!